Unable to connect to stream/no UpNP (Netgear C7000v2/AC1900)

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
Post Reply
mooneian
Posts: 1
Joined: Tue Dec 24, 2019 12:04 am

Unable to connect to stream/no UpNP (Netgear C7000v2/AC1900)

Post by mooneian »

Greetings.

I am at a complete loss as to what to do at this point. I am receiving an error message UPNP: could not find any UPNP devices, despite the feature being enabled in the router/modem (it's a combo) settings (see attachment). The "Am I online" feature likewise is resulting in an error for both ports:

Yawcam online check
This page will check if your webcam is visible on Internet.

Progress:
--------------------------------------------------------------------------

Checking Http URL: http://XX.XXX.XX.XX:8888 ... Error!

Checking Stream URL: http://XX.XXX.XX.XX:8081 ... Error!

Additionally, I have manually entered the port numbers as instructed (see attachment) and allowed those ports through the windows firewall (see attachment).

Any help or suggestions would be appreciated; thank you in advance!
Attachments
yaw04.PNG
yaw04.PNG (75.13 KiB) Viewed 32223 times
yaw03.png
yaw03.png (94.82 KiB) Viewed 32223 times
Yaw01.PNG
Yaw01.PNG (19.56 KiB) Viewed 32223 times
Post Reply