Working with Amcrest Camera

Questions? Suggestions? Need help? Talk about anything related to Yawcam...
Post Reply
lewiscallaway
Posts: 1
Joined: Tue Apr 02, 2019 4:32 am

Working with Amcrest Camera

Post by lewiscallaway » Tue Apr 02, 2019 4:38 am

I'm trying to get YawCam to work with my Amcrest PTZ camera. I've got the following URL for the camera:
http://159.242.43.9:8888/cgi-bin/mjpg/v ... &subtype=1
It works great in chrome.
When I put it into YawCam, it doesn't work. It prompts me for the password (even though I set it in the software) and then it just says couldn't connect to device.

The camera username is: kcmrwebsite
pass is: kcmrwebsite2


(I don't care about these getting out, it's view only access, and I'll change it after I get it working anyway)

What do you guys suggest to get it working? It is an amcrest IP2M-858W.

Thanks for your help, I really need it!!

Advertisement



avasthisamar
Posts: 3
Joined: Thu Apr 11, 2019 12:24 pm

Re: Working with Amcrest Camera

Post by avasthisamar » Fri Apr 12, 2019 6:11 am

I can't get the 2 way audio to work from my POE camera, IP2M-841E, through the app or web interface. I can hear the audio from the camera, they just can't hear me over the camera. Green light is on solid in the back and it connects fine through the NVR.

Post Reply